Fire Rated Glass Systems for Miami & South Florida

Apex Fire Doors supplies Tecfire’s certified steel and aluminum framed fire rated glass systems for any project in Florida and nationwide, including hinged doors, pivot doors, fixed walls, butt joint glazing, and curtain wall assemblies. Looking for custom artistic glass design instead? See our Iberi Signature Series.

SteelFire STB80

Steel framed fire rated glass system manufactured by Tecfire. Available in pivot doors (60 or 90 minutes), hinged doors (45, 60, or 90 minutes, single or double leaf), butt joint glazing (60, 90, or 120 minutes), fixed wall assemblies (60, 90, or 120 minutes), and curtain wall systems (60, 90, or 120 minutes). Maximum door height 98¾″ (2,508mm). Maximum door width 52¾″ (1,340mm) single leaf, 101⅛″ (2,570mm) combined double leaf.

AluFire AS85

Aluminum framed fire rated glass system manufactured by Tecfire. Available in hinged doors, in swing or out swing, standard or wide stile (45 or 60 minutes), and fixed wall assemblies (60 or 120 minutes). Maximum width 47⅛″. Frames available in powder coat or anodized finish, including stainless steel effect and wood effect options.

T Flame and KeraLite Glass

T Flame fire resistive glass, rated 45, 60, 90, or 120 minutes, is the glazing used across the SteelFire and AluFire systems. KeraLite T fire protective glass is also available for openings that do not require radiant heat protection.

Certifications

Both systems are UL listed to UL 10C and UL 10B, tested to NFPA 252, meet ANSI Z97.1 glazing safety requirements, are Intertek Listed and Labeled, and are hose stream tested.

Interior and Exterior Use

These fire rated glass systems are approved for interior use in Florida and in any other state or jurisdiction that requires hurricane or impact approval for exterior openings. This applies in particular to 120 minute fixed wall, butt joint, and curtain wall assemblies, which are not currently impact rated for exterior openings in South Florida. Exterior use is available in states and jurisdictions where local code allows it.

Exact configuration, glazing, and hardware are specified per project. Contact Apex Fire Doors to discuss your opening sizes and fire rating requirements.

Have an Opening That Needs Fire Rated Glass?

Contact Apex Fire Doors to discuss specification and pricing for your project.